How To Fix Windows Resource Protection

How do I fix Windows Resource Protection could not perform the requested operation?

There are a few methods to solve the issues are given below.

  1. Run the CHKDSK of Hard Drive.
  2. Run SFC Scannow in Safe Mode.
  3. Modify “Security Descriptors” in WinSXS Folder.
  4. Enable -> Windows Module Installer.
  5. Run “Recovery Commands.”

What does Windows Resource Protection could not perform the requested operation mean?

Some Windows functions do not work, and Windows crashes; use System File Checker (SFC) to scan and restore corrupted Windows system files. Still, many users reported, when they perform the “sfc /scannow” command, the “Windows Resource Protection could not perform the requested operation” error pops up.

Why is SFC Scannow not working?

Sometimes irregular shutdown or power loss can make specific files corrupt and stop the SFC scan from completing. Any file on PC can cause this problem to appear, and to fix it, you need to locate the corrupted file and replace it with a working file from a different Windows 10. Still, facing sfc scannow not working windows 10? Try restarting the PC.

What to do if SFC Cannot repair?

  1. Run SFC Choice
  2. Handle Installation Disc to Repair
  3.  Run DISM Command
  4.  Run SFC in Safe Mode
  5. Verify the Log Files
  6. Try Reset PC or Fresh Start

How to run sfc scannow?

  1. Click the Start button.
  2. In the search bar, type cmd.
  3. Right-click on “cmd.exe.”
  4. Choose “Run as Administrator.”
  5. Click Yes on the UAC prompt.
  6. Once the blinking cursor is visible, type: SFC /scannow
  7. Press the Enter key.

 

If something works wrong with your PC and a Windows function fails, freezes, or crashes, the most common suggestion is to run the SFC Scannow Command tool. Additionally known as the system file checker, this helpful tool will scan your Windows system files to view any corruption, inconsistencies, or damage. When these problems are located, the SFC will fix the files and naturally solve the problem. Accidentally, if the SFC isn’t working well, you might get an error message when running it, stating that the Windows resource protection could not perform the requested operation. There is a solution to solve the issue.

What is The Cause Behind a Window Resource Protection SFC Scan Error?

Microsoft has not agreed and instantly declared what the cause is following the “Windows resource protection could not perform the requested operation” SFC error. There are a few problems that could make it pop-up.

  • Something is preventing or conflicting with the SFC scan, and it can’t complete the check.
  • There is a “Windows server error.”
  • The “SFC Scannow Command tool is malfunctioning.”

The requested operation (the scan) can’t be completed because something either went wrong with your SFC utility tool or the disk issue causing the scan to fail. Despite what makes the “Windows resource protection could not perform the requested operation” SFC error, there are a few ideas you can fix it.

If you have tried running SFC scannow command tool many times and are getting the earlier error with an instant failure to scan afterward, then there are some resolutions here you should try.

1.   Run the CHKDSK of Hard Drive.

Follow these steps to run CHKDSK of HD’s

  1. In your Pc’s search bar, type in Command Prompt(cmd).
  2. Right-click ->Command Prompt tool -> run as an
  3. In Command Prompt -> type -> chkdsk c:/r press [enter].
  4. Press Y to confirm you need the chkdsk to run on restart.
  5. Restart your PC to enable chkdsk to run its scan.

(Remember: Always replace ‘C’ with the drive name where your Windows system files are located—allowing that the chkdsk is successful and either fix any errors, your SFC scan should instantly work.)

2.   Run SFC Scannow in Safe Mode.

Follow these steps to run SFC Scannow in safe mode.

  1. In the PC search bar – > type in msconfig
  2. Press enter and remain still for the system configuration window to pop-open.
  3. Click onto the boot tab, which is found beside the general tab at the top.
  4. Check the box for “safe boot” below the boot options.
  5. Ensure “minimal” is check marked
  6. Next, hit okay, and apply.
  7. Now restart your PC to reboot.

Now you are in safe mode,

  1. Re-run the SFC scan.
  2. Search for the cmd tool
  3. Right-click to “Run as an administrator” & open.
  4. Type in SFC /scannow [enter].

If this method also not working for you, move on to the next solution.

3.   Modify “Security Descriptors” in WinSXS Folder.

Follow these steps to modify the security description in the winsxs folder.

  1. In PC search bar -> type in cmd.
  2. Right-click -> Command Prompt tool -> run as an
  3. In Cmd -> type ICACLS C:\Windows\winsxs -> enter.
  4. Reboot the PC.

Now try again to run the SFC scan. If this method also not working for you, move on to the next solution.

4.   Enable -> Windows Module Installer.

Some time the SFC scan will work if the “Window modular installer” is enabled. If it is accidentally disabled, try to enable the WM installer and try the SFC scan again. To enable the window module installer, follow these steps.

  1. Press Win-key+ R to open the Run Dialogue box.
  2. Type ->msc & press okay.
  3. Locate the Windows Module Installer in the list and right-click.
  4. Select to start it from the list.

Now again, try to run the SFC Scannow Command tool and notice if you get the same “Windows resource protection could not perform the requested operation” SFC error. If this too not working, try the last method.

5.   Run “Recovery Commands.”

If you are yet getting the error in this case, and your current boot version of Windows is updated, you can boot in recovery mode and try to resolve the issue this process by enabling the “SFC scan utility” via the cmd.

  1. If the PC ON, restart it by the power options.
  2. When the PC begins its boot sequence, hit F11 to enter recovery mode or utilize a bootable USB drive.
  3. In recovery mode, use the Cmd from the list of tools and enter run.
  4. Once Cmd is up and running, type -> SFC/SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows ->

Once the preceding command is entered and executed correctly, exit recovery mode and boot like you usually would to your Windows desktop. Then open Cmd from your PC search -> run as an administrator and run the SFC scan to see if the issue persists.

Still, is it Not Working? Try this final method Run An Automatic Repair or Complete a Fresh Install of Windows.

If you did all the above solutions and are still getting the “Windows resource protection could not perform the requested operation” SFC repair error. It is suggested that you run the automatic repair.

  1. You will require a Windows 10 bootable installation disk.
  2. Create the “Microsoft Media Creation Tool” either on a blank-disk or on the blank USB flash drive.
  3. Launch the “media installation disk,” except instead of installing Windows, select the “Repair your computer” choice.
  4. Choose the Troubleshoot option and then select advanced options.
  5. Run the “startup repair” from an advanced options screen and remain for a process to complete.

After the repair is finished, restart your computer and verify whether the ” sfc Windows resource protection could not perform the requested operation” error is resolved. If all these methods do not solve the issue, there is no other option. Go for a fresh install.

 

Leave a Comment