The No Route error prevents many Discord users from entering voice channels. The No Route discord mistake, like the ICE Checking discord and Stuck RTC Connecting no route errors, belongs to the same group. When Discord tries to bind to a voice server, it is still stopped dead in its tracks.
What is causing the discord no route error?
- The IP address assigned to the PC was modified – this is common with Dynamic IP addresses that change. In this case, restarting the modem, router, and computer is all that is needed.
- Discord has been blacklisted by a firewall or antivirus. Discord would be unable to maintain an outgoing link with an external server if this occurs.
- The machine is connected to a VPN that does not support UDP. This is a common occurrence since Discord is configured to only function with VPNs that support UDP (User Datagram Protocol).
- Discord is prohibited by network administrators – if you try to use Discord at work or on a school network, it can be blocked.
- The speech area of the server is incompatible with your client – When you try to bind to a server on another world, this is said to happen. In this case, the option is to request that the server’s voice region be changed by the administrator.
- Your network doesn’t support QoS. It’s possible that your network isn’t designed to support Quality of Service High Packet Priority. You can switch it off in the Voice & Video settings.
How do you fix RTC in discord?
If you’re searching for a solution to this Discord error, this article will walk you through a set of troubleshooting steps. Below are a few different approaches that other users in a similar situation have used to address the problem.
To get the best results, start with the first approach and work your way down until you find a solution that works for your situation.
But, before proceeding with the solutions, double-check that your network is safe (not public).
Method 1- Restart modem/ router and computer
First, let’s make sure the problem can’t be fixed with a quick restart. The No Route error is often seen when an IPV6 link is interrupted by a dynamic IP address that keeps changing.
By restarting your router (or modem) and your computer, you will see if the problem is temporary. It is not necessary to reset the network settings of your route; unplug and reconnect the power cable.
Check if you can connect to Discord voice servers without getting the No Route error on the next startup. If the error persists, move on to the next method mentioned below.
Method 2- Uninstall firewall or whitelist discord
An overprotective antivirus or firewall that prevents Discord from maintaining outgoing connections may also be the cause of the No Root error.
The only way to see if this situation applies is to uninstall your antivirus software to see if Discord was able to bind to a new voice server. Here’s a short rundown on how to do it:
- To open the Run dialogue box, press Windows key + R. Then, to open Programs and Features, type “appwiz.cpl” and click Enter.
- Scroll down to find your third-party protection solution in Programs and Features. Right-click on it and choose Uninstall.
- Uninstall the third-party antivirus or firewall by following the on-screen instructions.
- To ensure that any leftover file from the protection solution is removed, follow this guide.
- Restart your machine and see if Discord connects without any problems.
Method 3: Remove your VPN or Use One with UDP(If applicable)
When a user is using a VPN solution that is not configured to use UDP, this error is often stated to occur (User Datagram Protocol). Since the Discord software isn’t built to work for VPNs who don’t use the User Datagram Protocol, this issue arises.
If you’re using a VPN, look up the service provider’s website for guidance about how to use UDP. You can also see if the VPN is causing the problem by disabling it and connecting to Discord from a different voice server.
If you discover that your VPN provider is causing the issue, you can change VPN providers or disable Discord’s “anonymity service.”
If this method didn’t work for you, move on to the next method mentioned below.
Method 4: Verify whether discord is blocked by your network admin
If you’re having this error when trying to use Discord from a work or school network, it’s most likely that the network administrator has blocked contact apps.
While this can get you into trouble, you can adjust a setting in Discord to allow it to communicate with external servers and avoid the No Route error. This is what you would do:
- To open the Run dialogue box, press Windows key + R. Then, to open Control Panel, type “control” and click Enter.
- Navigate to Network and Internet > Network and Sharing Center in the Control Panel. Then, for your Private network connection, click on the Connections hyperlink.
- Select Properties in the next window.
- Go to the Networking tab in the Properties screen of your connection. Pick Internet Protocol Version 4 (TCP/IPv4), and press Properties again.
- Shift Use the following DNS service addresses to Use the following DNS server addresses in the DNS server settings. Set the Preferred DNS server value to 8 8 8 8 and the Alternate DNS server value to 8 8 4 4. Then, to save the changes, press OK.
- Restart your machine after closing all open windows. Your Discord app can connect to a new voice server without the No route error the next time you start it up. If the problem continues, move on to the next approach mentioned below.
Method 5: Change the server’s voice region
If you’re having this error while calling a friend on the other side of the world, the problem is most likely due to the server’s voice region being different from yours.
The solution in this situation is to request that the server’s administrator set a separate voice region from the server’s settings. The admin can change the server settings by going to Server Settings > Server Area.
Method 6: Disable QoS from voice & video settings
Discord No Route rtc connecting problem has been identified and discord no route fix has been done by disabling QoS in the User settings. This problem is known to occur when computers are unable to keep up with High Packet Priority Quality of Service requirements.
This problem can be fixed by disabling QoS (Quality of Service) in the User Settings.
- Open Discord and select the gear icon next to your username (bottom-left corner).
- After that, go to App Settings and choose Voice & Video.
- Then, scroll down to Quality of Service and make sure the Allow Quality of Service High Packet Priority toggle is turned off.
- Close Discord, then reopen it to see if the No Route error persists. If you’re still getting the same mistake, try the next approach down below.
Method 7: Flushing the DNS Setting
Few users have confirmed that the problem was resolved after they reset their IP configurations using a series of commands in Command Prompt.
Here’s a short walkthrough on how to reset your IP configuration:
- To open the Run dialogue box, press Windows key + R. To open an Elevated Command Prompt, type “cmd” and press Ctrl + Shift + Enter.
- Type the following command into the Elevated Command prompt and click Enter:
- To flush the DNS, type the following command and press Enter once the current IP configuration has been released: ipconfig /flushdns
- To renew the IP configuration, type the following command: ipconfig /renew
- Restart your computer and check to see if the No Route error has been fixed.
- Check if the No Route error has been fixed on the next restart by rebooting your computer.
Method 8: Allowing Discord through a firewall
If none of the above approaches have succeeded, Discord is likely being blocked by your Windows firewall. You’ll need to allow Discord through your Windows Firewall to fix this issue. Follow the steps below to get started: –
- Type “Windows Firewall” into the search bar.
- Click “Allow an app through Windows Firewall” from the drop-down menu.
- On the top, select the “Changed Settings” option.
- After that, press “Add another app” and then “Browse.”
- Now it’s your turn. Select “Update.exe” from the Discord shortcut or its directory.
- Make sure both “Private” and “Public” are checked now.
- Restart your router and computer at this stage.
If this doesn’t work, the path has likely been blocked on your ISP’s end. Inquire with your ISP to see if there is a problem with the routing.
Why is RTC not connecting discord?
If you see “RTC connecting” on Discord, it means that the WebRTC (Web Real-Time Communication) protocol is unable to establish a link between you and the Discord servers. This prevents your voice chat from taking place.
Other problems, such as the popular “no path” error, are caused by Discord’s inability to create a link between your machine and its servers. Any attempt to create a link for voice or video communication will fail unless you have a secure connection from Discord to your PC.
While a Discord outage can sometimes be the cause of a Discord “RTC connecting” error, most users will discover that it is due to a local network issue. Restarting your computer is a positive first move since it forces your computer to reconnect to your local network.
Discord voice contact may be disrupted by anything from blocked network ports to a compromised DNS cache.
Why is my discord not connecting?
Discord not communicating upon startup can be aggravating. It prevents you from not only sending messages but also accessing the majority of the content you’ve already downloaded. The key sign that Discord isn’t working is a looping “Connecting” animation. But you may also have connectivity issues when attempting to reach third-party networks or send and receive messages.
Technical issues on Discord’s end, such as high amounts of traffic or internet access issues on your computer, are the most common causes of Discord stuck on communicating. Discord link issues can also be caused by corrupted app data or custom internet settings.
How do I fix the connection on Discord?
Beyond gaming, Discord is a useful tool that uses voice and text messaging to link people from all walks of life. It can be aggravating when you lose your Discord link and are unable to continue your conversation with your teammates.
You can usually repair your Discord link by following these steps:
Restart Discord – in some cases, exiting a chat and returning will resolve the problem.
Check to see if there are any new Discord patches and if anything needs to be fixed.
Restart Your Computer or Mobile Device – Restart your computer or mobile device and attempt to communicate again.
If the above does not resolve the issue, there might be another problem affecting your Discord experience.
Advanced Discord Connection Fixes
You can repair a bad Discord rtc connecting no route discord fix in a variety of ways:
- Check your antivirus software.
- Disable your VPN.
- Close background applications.
- Disable unnecessary browser extensions.
- Disable hardware acceleration.
- Try channel bonding technology.
Use your antivirus software
Malware will slow down your device and internet connection, causing Discord problems over time. To get rid of malware, run a scan on your computer.
Look at your antivirus program and disable those features if there is no malware. Your apps can sometimes interfere with your bandwidth or certain websites, causing them to load. If this doesn’t work, you will need to upgrade to a more powerful antivirus program.
Disable your VPN
Your VPN or proxy may be messing with your Discord conversation. While you’re watching the show, try turning it off or disabling it. You may even be able to upgrade to a VPN that won’t mess with sites that use a lot of data.
Close your background applications
Check for unnecessary background applications and close them. This may include programs that upgrade or download patches from the internet.
Disable unnecessary browser extensions
You may also be able to end any lag that is interfering with your Discord experience by removing any unwanted browser extensions. An extension can sometimes trigger problems with certain aspects of a website.
By clicking on the menu icon in the top right-hand corner of your screen, you can see a complete list of your extensions. From the drop-down menu, select “More Options,” then “Extensions.” You may immediately deactivate or delete extensions from this list.
Disable hardware acceleration
If you’ve allowed hardware acceleration (which allows your GPU to process data), you may be having trouble connecting to Discord. To switch off this function, perform the following steps:
Step 1: Choose “Settings” from the drop-down menu in the window menu on the top right-hand side of the page.
Step 2: Scroll down to the bottom of the page and choose “Advanced.”
Step 3: Go to the “System” box and uncheck the box that says “Use hardware acceleration when available.”
Step 4: Close and reopen your tab.
Try channel bonding technology
If nothing else seems to be working, consider using a bonding VPN program like Speedify. Channel bonding technology in Speedify enables you to unlock bandwidth from all your computers. This enables you to use many internet connections at the same time.
Even if you don’t have many connections available, a bonding VPN will help in reducing packet loss and thereby increasing your available bandwidth.