The error message “Audio resources not responsive” is generated by audio troubleshooting of Windows when windows audio service won’t start, which is typically operated when your audio devices aren’t working properly.
This error normally indicates that your sound windows 10 not working in your machine’s messages or commands.
It’s very normal that whenever you use Windows Update to update your edition of Windows giving you windows audio services not responding errors.
There are some alternative solutions for how to fix audio services not responding Windows 10, including ensuring that all sound systems are functioning properly and that the drivers of the system are up to date.
If none of the given options work, we’ll have to perform the system restoration to overcome this sound windows 10 not working issue.
How Do I Fix The Audio Service Is Not Responding?
Undoubtedly, many users have had the same problem when windows audio service won’t start: they are unable to activate audio on their computers. Most people would run the Windows audio troubleshooter at this point and try to resolve the issue.
A few of them, though, would be frustrated because the troubleshooter is unable to resolve the issues with their audio devices and shows you windows audio services not responding error.
How Do I Reset My Audio Service?
Are you struggling with the issue that your windows audio service won’t start, then you may have to try restarting the windows audio service to resolve the issue of sound windows 10 not working?
- First, click the Windows key and R at the same time, then enter “Services.msc” in the blank bar provided and click Enter.
- Find Windows Sound Resources in the Service window that appears. When you’ve found it, right-click it and choose Restart from the menu.
- To open the window “Properties”, double-click the services again.
By following the steps mentioned above, you’ll be able to reset windows audio services not responding.
How Do I Fix Windows Sound?
First of all, make sure the cables are in good working condition and that the volume is turned up.
Verify whether the current sound device is set to the machine default device. After installing an update, try to restart your computer or try performing a System Restoration.
Run the Audio Troubleshooter in Windows 10 and ensure that your audio driver is up to date. Else try to uninstall and then install the audio driver.
Why Is Audio Not Working?
To correct this issue, right-click on the speaker symbol in the taskbar of the windows and select Sounds from the drop-down menu. Find the system you would like to use within the Playback tab.
If you couldn’t see it, then right-click and select Display Disabled Devices. Then select the external device, and select the Set Default key.
How To Restart Windows Audio Service Windows 10?
If you’re getting the error message on Sound services in Windows 10, then the thing that you should do is just restart windows Audio services in your system which will resolve your problem. The way to restart windows audio service not responding is given below.
In this article, you’ll come to know how to fix audio services not responding Windows 10. To resolve your issue continue reading.
Method 1: Restarting Sound Services.
We’ll try rebooting the sound service before resorting to more complicated and comprehensive solutions. Audio service is available besides your drivers and audio hardware, and it is responsible for handling the sounds on your device.
A simple reboot can be all that is required to reset its settings and resolve the problem.
- Hold Windows + R and type “services.msc” into the Run box that appears and hit Enter.
- Traverse through all of the details once you are in services and find “Windows Audio.” Now, do right-click on the windows audio and select “Restart”.
- Right-click entry once more and choose “Properties.” Choose “Automatic” as the startup type. To save your changes and exit, click Apply.
- Return to the services menu and search for “Windows Sound Endpoint Creator.” Select “Restart” from the context menu when you right-click it. Select “Start” if it hasn’t already begun.
- After initiating the process go to its properties and choose “Automatic” as the startup type. To save your changes and exit, click Apply.
- See if the issue still exists after restarting your machine.
Method 2: Verifying Audio Elements
We’ll check that all of the sound components are working before heading on to more advanced solutions. If all of them aren’t right, it’s possible that’s why you’re receiving the error alert message.
Also, momentarily disable your antivirus because it can block certain services, causing you problems. These are programs, and excluding any of them may result in inconsistencies.
- Type “services.msc” by pressing Windows + R together and click Enter.
- Now check to see if the following resources are up and running. If they aren’t already started, on the right-click and select “Start.”
- As well, ensure that “Automatic” is selected for both of these services.
- Verify if the issue has been resolved after beginning the processes (whether they were stopped). If it didn’t, try reactivating your computer and checking again.
Method 3: Using Command Prompts To Run Certain Commands
If none of the aforementioned solutions work or the tests on your computer were already right, we may try running some raised command prompts instructions from your command prompt. Please keep in mind that you’ll need an account of an administrator to complete this task.
- Right-click the application and choose “Load as administrator” by pressing Windows + S together and typing “command prompt.”
- Type the command given below into the raised command prompt and click Enter: “total local group admins/add service network”
- Now click Enter after typing the following order: “total local group Admins /add local service”N
- Now type “exit” and then click Enter after all instructions have been completed.
- Restart your machine to see if the issue has been resolved.
Method 4: Incorporating Default Audio Drivers
Since your OS (operating system) keeps evolving over time, the audio drivers are provided with most packages and are modified on a regular basis.
Your machine already has a simple standard driver saved so that when you remove your existing drivers, your machine detects the attached hardware and activates the appropriate driver. On your machine, we can attempt to install the standard drivers.
- To access the start bar’s query menu, click Windows + S together. In the text box, enter “system” and choose the first thing that appears in the list.
- When you’re in the setup, go to the left of the monitor and select “Specialized system settings.”
- Select “System Installation Settings” under the Hardware section.
- Choose the response “No (your system will not operate as assumed)”. Save your changes and leave. This will prevent Windows Upgrade from automatic upgrading of your sound drivers.
Note to remember: If this method does not succeed, ensure the response is set to “Yes.”
- To access the fast start menu bar, click Windows + X together and choose “Machine Manager” from the set of options provided.
- Widen the “Voice, video, and game emulators” section once you’re in the Task Manager. Choose “Uninstall machine” from the context menu when you right-click your audio machine.
- Verify the boxes to disable the driver too, and then continue with the process of uninstallation.
- After you’ve uninstalled the system, go to System Manager and right-click any blank void, and pick “Search for hardware modifications.” Your device can now identify your sound hardware and eventually install the standard drivers.
- Test to see if this makes a difference. Even, after installing the standard drivers, restart your device.
Method 5: Realtek or High-Quality Sound Device Installation
Numerous users claimed that installation of the High-Quality Sound Device driver rather than the IDT High-Quality Sound CODEC etc. fixed their issue. Before you move to a device’s restoration or a fresh installation, you can seek this last choice.
- To access the fast start menu, click Windows + X together and pick “System’s Manager” from the provided list ofoptions.
- Widen the “Audio, video, and gaming controllers” section once you’re in the System manager
- Choose “Update Driver” from the context menu of your audio system. Now you have the option of installing the drivers eventually or manually. Choose “Browse my machine for driver operating system” from the drop-down menu.
- Now choose “Let me select from a set of possible drivers on my machine”.
- To make sure that each and every result is specified in your list of drivers, uncheck the choice “display compatible hardware.” Make your way through all of the drivers before you come across a High-Quality Audio Machine.Choose it and move on to the next ste
- To finish the installation process, follow the directions provided on-screen. Check to see if the issue has been resolved by restarting your machine.
Note to remember: If it doesn’t operate, try installing the drivers from the website of the manufacturer and installing them with the help of the instructions given above. In the vast majority of cases, this method also resolved the issue.
Method 6: Performing A Fresh Installation Or Trying To Restore From A Previous Restore Point
If none of the methods mentioned above work, we have no other option but to Windows restoration to the most recent restore point. You could install a fresh Windows version if there is no last restoration stage.
You could save all of your licenses using the application “Belarc” and backup your information using some external storage device, and then execute a clean install in your device.
Here are steps to restore the Windows from the most recent restore stage.
- To open the search bar of the start menu, hold Windows + S together. In the reply box, enter “restore” and pick the first program that appears.
- The one which is provided in the restoration settings, select System Restore from the System Protection tab at the top of the window.
- A wizard would then appear, guiding you along all of the steps necessary to restore your device. Continue with the rest of the instructions by pressing Next.
- Now choose a restore point in the provided list of possibilities. This is where you’ll find a list of all of your device restore points if you’ve more than one.
- Before starting the process of device restoration, Windows will ask you to check your activities one last time. Continue with the procedure after saving all of your work and backing up essential files and folders just in case.
- After you’ve completely restored the machine, log in and see if the error has been resolved.
If you are out of restore points, you can use bootable media to perform a clean installation of Windows. You will learn how to make bootable media in our post.
There are two options by which you can freshly install windows in your machine, the first one is using Microsoft’s media development tool or secondly through Rufus.