How To Clean Mechanical Keyboard – Ultimate Guide 2021

Mechanical keyboards of high quality, such as those made by Das Keyboard, will last for decades. There’s a catch: dust and grime can degrade a keyboard’s switches and electronics long before they fail. Contaminants can be kept at bay by cleaning, the most critical keyboard maintenance job. Spills are a different story, so they’ll have their segment.

What Is The Easiest Way To Clean Mechanical Keyboard?

The easiest ways to Clean Mechanical Keyboard are :

Preventive cleaning

Daily, you can gently clean your Mechanical Keyboard and clean keycaps. It’s vital to avoid grime accumulation, and it’s even more important if you eat next to your keyboard. The painted metal plate that supports each key switch will partially fuse with dust and food over time. The particles must be washed away once attached, which is both uncomfortable and inconvenient.

  1. Unplug your Mechanical Keyboard.
  2. To clean the dust from the pan, use a vacuum. The best results are obtained by gently pressing the vacuum’s attachment tube against the keycaps, thus actuating each key on the keyboard. Small handheld vacuum cleaners with no spinning brushes are efficient.
  3. Using a damp microfiber cloth, wipe down the whole keyboard.
  4. Using another cloth, dry it. Using a paper towel can cause the keyboard to shed particles and leave tiny scratches on its surface.

When washing keyboards, avoid canned air at all costs since two harmful side effects are likely. To begin with, canned air is frigid when released. This can lead to condensation forming on scratches or worn metal surfaces, resulting in corrosion or fused grime. Dust can be blown directly into a keyboard’s switches by canned air, resulting in an uncomfortable gritty sensation. Vacuum cleaners solve these problems by sucking room temperature air away from the controls, as well as dust.

How To Clean Mechanical Keyboard

Deferred Cleaning

Some dirt is stubborn, sticking to the plate despite vacuuming and wiping it down regularly. Additionally, a coating of finger oils can accumulate on your keyboard’s keycaps over time. Fortunately, there are tried-and-true strategies for resolving such problems.

  1. Unplug your Mechanical Keyboard.
  2. To remove the keycaps from your keyboard, use a keycap puller. The majority of broad keys (space, enter, transfer, etc.) are wire-stabilized, making them more difficult to detach. It’s best to wipe them clean with a slightly damp microfiber cloth if you don’t feel comfortable removing and reseating them.
  3. Denture tablets or dish soap may be used to clean the keycaps.

Put the keycaps in a container, fill it with warm water, and drop two tablets into the bath. Soak for at least 6 hours, then rinse thoroughly and air dry the keycaps stem up. The water in the plus (+) shaped recesses of the keycaps would take some time to evaporate. Since dish soap is difficult to rinse away, it is the second-best option.

Denture tablets are a perfect way to keep your keycaps clean. Oils are removed, sterilized, and little or no trace is left behind.

  1. To loosen particulate matter that has adhered to the pad, use a small stiff-bristle brush (or a dry Q-tip, which can deposit a few bits of unwanted fuzz) while the keycaps soak. Brush bristles should not be near switch stems. Dust may be pushed deep into a switch by the bristles, preventing vacuum removal.
  2. With a handheld roller-less model or the attachment tube of a full-size unit, vacuum the plate thoroughly. Turn the keyboard upside down and let any loose debris fall off if the vacuum won’t pick it up.
  3. If there is a goo-covered spot on the pan, clean it up with a slightly damp cloth or a Q-tip. Many tiny cleaning tools may also be used. If at all necessary, avoid moistening the keyboard switches.
  4. To avoid dust buildup, put the keyboard face down while the keycaps dry.
  5. Both keycaps should be removed.
  6. Using a slightly damp microfiber cloth, wipe down the case.
  7. Instead of using paper towels, dry it with another cloth. Particles and bruises are left behind when using paper towels.

 

Advanced Cleaning

Perhaps you decided to buy a secondhand keyboard. Let’s imagine the previous owner kept it in a dingy basement and strewn Cheetos between the keys. Perhaps you were the previous owner. We’re not here to pass judgment, particularly if you’re trying to clean up your act. This guide is for keyboards that are filthy on both the inside and outside.

Continue with the following steps after completing steps 1 and 2 in the Deferred Cleaning guide:

  1. To clean the grime off the keycaps, consider using an ultrasonic cleaner. They’re also perfect for cleaning jewelry and toys around the home. Use the keycap soaking method mentioned in step 3 of the Deferred Cleaning guide if you aren’t interested.

Fill the cleaner halfway with keycaps, cover them with water, drop two denture tablets in, and run it for 6–10 minutes. Follow any additional instructions provided by your computer, such as a minimum fill line. To ensure that each keycap is exposed to the ultrasonic transducers, stir every 2 minutes.

Ultrasonic cleaners operate by vibrating water at high speeds, causing supercavitation, which blasts dirt away without damaging the substrate.

Ultrasonic cleaners are available from several retailers, but eBay has the best prices. Ultrasonic cleaners with at least 120 watts of power and a small volume (around 3 litres) work well. Many come equipped with heating elements that can be used to steam water. Some unscrupulous sellers advertise the total power as the combined heating and ultrasonic power.

  1. Lay the keycaps out to dry with the plus-shaped stem facing up until they’re done. The remaining water can take some time to evaporate entirely.
  2. Open the keyboard case with caution. Make sure the screws are kept in a jar. If they’re different sizes, grouping them will make reassembly easier. If any cables need to be removed, do so with caution. If you’re having trouble recalling what goes where take pictures with your phone.
  3. Set the PCB and plate aside until the keyboard has been disassembled. If the dirt and grime aren’t too bad, you can clean the case halves inside with a brushed attachment. After that, wipe down the area with a damp cloth.
  4. If the mess is serious (and there are no electronics attached to the case), clean the case halves in a dish soap solution with a medium-strength bristle brush. Enable the water to evaporate from places that cannot be reached after thoroughly rinsing and drying both halves with a cloth (like screw holes).
  5. To loosen particulate matter that has adhered to the plate, use a small stiff-bristle brush. Brush bristles should not be near switch stems. Dust may be pushed deep into a switch by the bristles, preventing vacuum removal.
  6. If there is a goo-covered spot on the pan, clean it up with a slightly damp cloth or a Q-tip. Many tiny cleaning tools may also be used. If at all necessary, avoid moistening the keyboard switches.
  7. While the other components dry, position the clean plate and PCB face down to avoid dust accumulation.
  8. Reinstall all stabilized keys adjacent to the case’s edge until it is dry. Examples include the space bar, keypad plus, and keypad enter. If the stabilizers are rattling, you should lubricate them.
  9. Assemble the keyboard.
  10. Replace its keycaps.

After you’ve cleaned your mechanical Keyboard thoroughly, it should look professional and function flawlessly.

 

Dealing with Spills

A mechanical keyboard’s worst enemy is spilling. Water isn’t hazardous if you unplug your keyboard quickly and let it dry for a long time, but flavored drinks (especially sugary ones) may cause serious problems. When a spill happens, do not flip or tilt the keyboard. Furthermore, after the spill has dried, do not inspect the keyboard on a computer you care for. It may damage the USB port or cause the device to lock up by vital spamming presses.

  1. After a Deferred Cleaning or Advanced Cleaning, if the liquid did not get into the switches or fried something sensitive, you will continue to use the keyboard.
  2. You can buy a new keyboard.
  3. If you know how to solder, you can take out all of the switches on a keyboard. You could then dismantle and clean each switch and keyboard component. You may also repair any switches that the spill has damaged. It is not recommended because the procedure is time-consuming and labor-intensive. If applicable, it would also void the warranties.

How do you clean mechanical keyboard switches?

Clean around the mechanical keyboard switches with a damp cloth or cotton swab. Enable the keyboard frame to dry completely after wiping with a clean, dry cloth. Remove the mechanical keyboard keys from the water and dry them with a clean cloth absolutely, and after that, you will be able to clean mechanical keyboard keys perfectly.

How do you clean a very dirty keyboard?

  1. Don’t get your keyboard dirty and make it a nasty keyboard in the first place.
  2. Tap crumbs lose, but don’t shake your laptop.
  3. Get some air.
  4. Try a dust vac to clean the mechanical keyboard.
  5. For Caked-on grime, Use screen wipes.
  6. Use cotton swabs between the keys.

When should I clean my mechanical keyboard?

Cleaning a mechanical keyboard should be done once a week. All you have to do is wipe down the keyboard’s surface a couple of times: 1. Use a damp microfiber cloth to wipe the keyboard.

According to the best advice I found while researching this post, you can clean your keyboard once a week. During flu season, if you’re sick or spill a bunch of food all over your screen, common sense says you can raise this pace.

Wrapping Things up

You’ve learned how to keep electronic keyboards in good working order. Have you thought of getting one? From the office staff to gamers, the Das Keyboard website has a wide range of high-quality choices. If you already own a mechanical keyboard, check out a new model with different switches. It’s just part of the fun to have so much variety!

 

 

 

Leave a Comment