How To Check If Controller Is Working Pc

How to troubleshoot game controllers in Microsoft games is covered in this post. Checking game compatibility, evaluating the game controller in Microsoft Windows, and turning on game controller support in Microsoft game titles are all covered in this article.

How To Check If Controller Is Working Pc

Introduction

This article explains how to troubleshoot game controllers in the items mentioned in the article’s “Applies To” section.

More information

Follow these steps in the order they appear to troubleshoot game controller issues.

Method 1- Verify that your game supports game controllers

Some games do not support game controllers in any way.

To learn more about game controller support in these games, go to the Microsoft Knowledge Base and look up the following article number:

300970 Games: In certain games, the game controller does not work or does not work as intended.

Method 2- Test the game controller in Microsoft Windows

Keep in mind Since Microsoft Windows comes in a variety of versions, the steps below can vary depending on your device. If that’s the case, consult your product documents to finish these measures.

Test controller windows 10:

  1. Open Game Controllers in the Control Panel. Using one of the following approaches to do this:
  • Click the Start button in Windows Vista, type joy.cpl in the Start Search box, and then press ENTER.
  • Click Start, Run, type joy.cpl, and then click OK in Windows XP and earlier versions of Windows.
  1. Then, on your game controller, choose Properties.
  2. Check the game controller’s functionality on the Test page.

If you’re having trouble selecting your game controller or check is my controller working properly. If not,  contact the game controller manufacturer for assistance.

Method 3: Configure your game controller as the preferred device

Follow these steps to set your game controller as the preferred device:

  1. Open Game Controllers in the Control Panel. Using one of the following approaches to do this:
  • Click the Start button in Windows Vista, type joy.cpl in the Start Search box, and then press ENTER.
  • Click Start, Run, type joy.cpl, and then click OK in Windows XP and earlier versions of Windows.
  1. Click Advanced.
  2. Select the game controller you want to use under Preferred device.
  3. Click OK two times.

Method 4: Enable the game controller for the game

It’s possible that you’ll need to enable the game controller. Follow these steps to accomplish this:

  1. Click Settings.
  2. Pick the Enable Joystick check box in the Control list.
  3. To close the settings window, click OK.

Method 5: Reset the joystick

Follow these steps to reset the joystick:

  1. Exit the game.
  2. Unplug the joystick.
  3. Reconnect the joystick.
  4. Restart the game.

Method 6: Reset the controller

Step 1- Follow these steps to restore the default windows 10 controller settings in Flight Simulator X:

  1. Start Microsoft Flight Simulator X.
  2. Click Settings.
  3. Click Controllers.
  4. Click Reset Defaults.

Step 2- Rebuild the Flight Simulator configuration file if the problem persists. Follow these steps to accomplish this:

  1. Windows XP
  2. Click Start.
  3. Click Run.
  4. In the Open box, type the following command, and then press Enter: %appdata%\microsoft

Windows Vista

  1. Click Start.
  2. In the Start Search box, type the following command, and then press Enter: %appdata%\microsoft
  3. Select Folder Options from the Tools menu.
  4. Click the View tab in the Folder Options dialogue box.
  5. Click to select the Show hidden files and folders check box.
  6. Clear the check box for Hide protected operating system files.
  7. Clear the check box for Hide file name extensions for established file types.
  8. Click OK.
  9. Locate and then double-click the Flight Simulator folder.
  10. Click Delete on the.cfg file after right-clicking it.
  11. When prompted to confirm the deletion of the file, select Yes.
  12. Restart Flight Simulator.

How do I test my controller on Windows 10?

Typically, hardware used to communicate with a device, such as a keyboard, mouse, and trackpad, is plug-and-play. Generic, no-name, off-brand, and knock-offs would work fine on a PC.

Game controllers are a different form of input device, and they, like keyboards and mice, appear to come from well-known brands as well as a slew of knock-offs. However, they do not work in the same way as keyboards and mice. In reality, if Windows 10 is unable to instal the appropriate drivers, they can not function at all.

Test a game controller on windows 10

If you have a game controller connected to your Windows 10 PC and it isn’t working in any game, you can check to see if the input is being detected.

A game controller may stop working for a variety of reasons, so if you have a generic controller or an Xbox or PlayStation 4 controller that isn’t working, check to see if its input is being detected. This search can be performed in any modern browser.

Pre-requisites

In order to run this test you need;

  • A modern browser like Chrome, Firefox, Opera, or Chromium Edge.
  • Your controller on hand, and connected to your system.
  • Any and all available drivers for the controller that is mounted on the system.

Test game controller windows 7/ test game controller windows 10 input

To begin the test, follow these steps.

  • Connect your game controller to your computer.
  • Enable drivers to update if you hear the installing hardware chime on Windows 10.
  • Go to Gamepad Tester in your browser.
  • To wake it up, press any button on the controller.
  • Windows Gamepad Tester will recognise the controller.
  • The buttons on the controller will be mapped and displayed on the screen until it has been detected.
  • To test them all, press the buttons and joysticks.
  • You’ll be able to see the rotation on the axis with joysticks.
  • The time stamp for the various keypresses and their inputs will also be displayed in the app.
  • Click ‘Vibration’ if your controller vibrates, and it will measure the vibration by vibrating the controller in your hand.

Interpreting results

If a keypress on the controller isn’t heard, the button is possibly broken, much as with keyboards and mice. If no input is detected, your controller isn’t connected to your device.

The other keypress statistics that are displayed can be used to fine-tune the responsiveness of the keys.

If Gamepad Tester detects the controller but it doesn’t work in a game, the issue is most likely with the game. It may not support controllers or, if you’re using generic controllers, it may block them.

 

How do I know if my PS4 controller is working on my PC?

If you’re concerned about the functionality of your PS4 controller and think it’s not functioning properly, you can always attach it to your Windows 10 device to diagnose any problems.

  1. Connect your PS4 controller to your device using the USB cable. Link your controller to a USB port on your device with a USB to Micro-USB cable. These ports are normally found on the front or back of your computer tower, on the back of your display (if you have an all-in-one), and on the sides of laptops. The Micro-USB cable connects to your PS4 controller at the end.
  2. Right-click the Windowsstart.png Start logo image. If you haven’t pushed the taskbar, you’ll see this logo in the bottom left corner of your screen.

A menu will pop up from your mouse.

  1. The search window will show you results when you type “Control Panel.” You should see this listed as an app under “Best Results”.
  2. If you don’t see it here, you can open the Run dialog.
  3. Click Devices and printers. You’ll see this under the header , “Hardware and Sound”.

You’ll see a listing of all your connected devices.

  1. Right-click Wireless controller. You’ll see this with the picture of a controller that closely resembles your PS4.
  2. Click on windows 10 Game controller settings. This is usually the first listing in the drop-down menu.

Another window should pop up.

  1. Click Properties. You’ll see this in the lower right corner of the window that pops up.
  2. To see how the buttons on your controller react on the computer screen, press them. A bar will slide across the screen to indicate how hard you’re pressing the button on your remote.

The following window will have two options: “Settings” and “Test.” To begin, go to the Settings tab and then click the “Calibrate” button in the “Calibrate” window. From here, the Calibration Wizard will guide you through the steps necessary to properly set up your controller.

How do you test joystick?

The following window will have two options: “Settings” and “Test.” To begin, go to the Settings tab and then click the “Calibrate” button in the “Calibrate” window. From here, the Calibration Wizard will guide you through the steps necessary to properly set up your controller and test joystick windows 10.

How do I know if my Xbox controller is working on my PC?

If you want to play games on your PC with a joystick, the Xbox gamepad is unbeatable. The Xbox controller is the obvious option if you want a dead easy plug-and-play experience, and it’s certainly among the best PC controllers—Microsoft revamped its controller after the launch of the Xbox One, making its bumpers feel better and incorporating Bluetooth compatibility.

You won’t need any special programme for your PC (or most games) to recognise your pad because of the built-in Windows driver. So, what’s the point of a guide in the first place?

There are a few different ways to connect the Xbox One controller to your PC wirelessly, as well as a few things you should know about the different controller versions and how they’ll interact with your PC.

Using your Xbox one controller

If you don’t mind a tether, using a wired Xbox One controller on a PC is as simple as it comes. Connect your controller to a USB port on your computer using a micro-USB cable. The correct driver should be installed by Windows, and the Xbox Guide button in the centre should light up, indicating that you’re ready to go!

 

Leave a Comment