How To Cable Manage 2021

In the following article we are going to discuss “How To Cable Manage”. As we all know, nowadays most of the people use PCs and other electronics but there is a thing that came out of how to keep everything well organized.

How do you manage computer cables?

If there is any issue of making a new PC setup that basically gets more important,  and it is known as cable management. If you are not aware about what cable management is, it can be known as the act of routing the cables in your computer or behind your computer table in such a way to where they will basically look clean and organized and to where they are not getting the airflow in your computer’s case.

I can also think that, for most of the parts, a great effort to stay the cables away from your motherboard and case fans as well, in most of the cases, a good effort as long as your first goal is to build a PC that will always allow you to play your favorite games.

How To Cable Manage

Whereas, I am really appreciating flawless cable management. There are not a lot of things in life that I find more attractive than a clean-looking and organized computer with excellent cable management.

And, if you still want more than just a gaming PC, so if you want something that is really attractive and impressive, then you will need to make sure your cabling is to be clean.

When the point is how to help you in getting an idea of what good cable management looks like and to inspire your new upcoming build, So, here I’ve already selected a few examples of some really good methods of cabling.

Here is no over-the-top liquid cooling in this formation. There is not an overload of RGB lights. And no crazy color scheme that makes it hats off. It is simply a nice-looking white and black setup with solid cable management.

If your cable management is better, then there is an extreme custom liquid cooling setup that can take attention away from your cables together. If your cable management is not good, then it doesn’t matter how cool your liquid cooling loop usually looks, and your system would not look great that much. The cabling in this build is performed well and that basically allows the liquid cooling setup to take center stage.

It is basically the same strategy as throwing out all your dirty laundry under your bed so that your room looks more clean and organized. It can also work to an extent. But, if you want good cable management, then you go to the unseen areas in your build like Reddit user.

Many times, we just have to congratulate system builders on their cable management when, seriously, all they have done is hiding their cable mess under the table. Whereas, most of us who take cable management are a bit more serious. For those you have to select a few cable management options, and we salute you for that, on the other side manager of cables in the unseen image of “behind-the-desk.”

There is also good cable management and then there is also next-level cable management. It is not only that this builder used to pull any kind of magic tricks on their cabling system, but instead that they have to match their cables to their fans and power supply that generally takes this build to a brand new level.

Keeping your cables well-organized at the backside of your motherboard is like clean cabling under your desk. It can be known as a next-level effort only carried out by the serious cable managers.

Managing, hiding, and storing the cables and wires in and around desks in your home or office with the following new desk cable management items. Some under desk baskets and many raceway channels can also help you in routing and protecting cords, whereas, keeping them to the ground where they can also create some trip hazards. Most of the organizers and wire holders for desks can also be used to keep cords separate, and unseen power strips and excess cord length can stay out of the reach of Cable Bins or Cable Boxes. We are very sure of having what will be the right to make your home or office desk area both safe and clean.

Desk Cable Organizers

Whether you are at home or in the office, the computer desk is a prior place for cables and wires to get tickled, tripped on, and can also be eaten up by chair’s wheels, and same. Cleaning cable systems, getting off from the floor and out of the way is very important to ensuring the sanity of anyone who’s going to be sitting at the computer desk. So we are very thankful that there are several items that are available to make the process of maintaining those cords simple and easy.

Desk Cable Trays

It is one of the simplest and most effective options for getting your cords up off the floor where they can generally cause trouble at the under desk cable tray. It is a basket style tray that is usually attached to the underside of your desk by using screws, which basically allows you to sort cables through it so they can easily be out of sight and elevated. They are easily available in a very different sizes to meet your cable needs, and some of them can be trimmed or cut to the desired size also. The basket nature usually helps in allowing cables to break out whenever needed.

Channel Raceway

Same as in purpose to the under desk trays are the many different types of channel raceway for many desk applications, and by the way they differ in design. Unlike cable trays, the raceways are solid and enclosed, meaning cables can generally break out the route on the other end. Whereas, from a simple standpoint, the raceways result in doing a better job of hiding cords. Many examples of easy installation by using adhesive, and there are many varieties available, and basically including locking raceway which is fully enclosed by cables, j-hook channels that usually allow cables to be dropped in, and some flexible cord towers to hide cables that are travelling from floor to desk.

Cable Wrap

There are a lot of options that usually allow you to wrap or bundle cables together to make them organized, routing them and protecting them. Spiral wrap is an amazing method that, like the under desk trays, also allows individual cables to separate from the bundle of cables at the desired point. Here is another option is the cable sash, which basically refers to a unique fabric option with a hook and loop style formation to secure cable bundles. These options are really very great for you when you have a lot of cords coming from a single point, like the back of a CPU or monitor.

Cord Organization Kits

There are many different varieties of specifically designed kits which are also available for organizing both home or office cables, as well as they are also childproofing or pet-proofing areas. Maybe you’re a professional installer or just trying to clean up the house or eliminate many hazards, so there is a kit that will also provide you with the cable protection options you will really need. These kits also have some features of sleeving, wraps, covers and many other items to help you organize and bundle all your spreading wires.

Cable Storage

Most of the time, you just want cables completely concealed. There are a lot of items designed with the purpose of organizing cables, as well as other unsightly components like many power strips and adapters. By enclosing them in something resembling a box, or a bin, and you can definitely conceal excess cords, cables and other clutter in a standard manner. By using conferencing rooms, there will also be a transition channel that will also run from your floor to the conference tables which is containing cables that run to desk materials and with table connected power and many data centers.

Cable Holders

This is mainly designed for low density applications, a cable holder is a simple solution that you will find more attractive. Containing many loops designed to grip all the individual cables or some small bundles,and these holders may route cables and can be easily attached to the backside of a desk or many entertainment centers to containing multimedia or many computer cables. They can also prevent cords from falling behind tables and desks but only when they are unplugged.

desk cable management

What is needed for cable management?

When you will find cables and cables everywhere. Then basically when we will need them but they can be so tangled if improperly organized. Whereas wireless power and data transfer methods are growing in popularity nowadays, most of the  applications still require a wired connection. I want to tell you that how else are you going to power your 3 monitor setup?

When we will we need our cables, that are having a huge mess as a result is not required. There are also some DIY hacks that you can very easily implement to help manage your cables but you will also find it usually to purchase some components to aim your pursuit of an unorganized desk.

There are the following 12 accessories which will be a good option to start and will stop you from feeling bad every time when ou look at your unorganized desk.

1. REUSABLE CABLE TIES

Cable ties are a clip for cable management but whereas traditional cable’s tie knot must be cut away after being fastened. These cable ties are also reusable moreover, and also featuring a releasable comfort. This can also refer to repurposing them whenever needed to do so.

2. MULTIPURPOSE CABLE CLIPS

Multipurpose cable clips are basically very useful for keeping important cables in the desired position. For example, you may also have experienced irritation while having your phone charging cable fall down from your desk even when you would keep it there for easy access. So, for peace of mind, you will always have to consider working with this material into your cable management process.

3. DOTZ CORD IDENTIFIERS

Dotz Cord Identifiers are generally proved great for differentiating between many different cables. They are especially made very useful near to the end of cables that are used to plug into your cable protector. So most of the cables used to look similar, these types of identifiers can also help you in avoiding having to trace a cable all the way back to its other end just before having the confidence to unplug it.

4. CORDIES

Cordies come to another great solution for keeping your cable ends at plug and always near to hand.

5. WIREMOLD C110 1-CHANNEL CORDMATE KIT

Cable trunking will always help you in hiding your cables as long as they run along a wall. This is usually offering by Wiremold is already self-adhesive and can also be painted, which basically making it easy to organized.

6. DIGITGEAR CABLE MANAGEMENT ZIPPER SLEEVE ORGANIZER

This DigitGear cable management solution can be really very helpful for you to cut down on tangled cables. This solution is a very great option for keeping tangled cables out of the way.

7. OMNIMOUNT OCM ON-WALL CABLE MANAGEMENT COVERS

If you have unorganized cable issues running along your wall, these types of covers can be a great way to organize them. These covers are not that difficult to install but they will usually require drilling into your wall for installation of these types of covers.

8. J CHANNEL CABLE RACEWAY

The J Channel Cable Raceway is a really very simple and an amazing solution for organizing cables. The opening is usually at the top of the device and which makes it very easy to install and access most of the cables. It usually comes with a self adhesive back, which is always allowing for various concealing methods. You can conceal this at the side of your desk, on desired walls or even on your furniture.

9. BLUELOUNGE CABLE BOX

Cable clutter can also create a problem on the floor, specifically when it relates to cable protectors and many power strips. To hide unseen cables on the ground , you can also use the Bluelounge Cable Box.

Basically, you can also place more than one of your power strips or cable protectors inside of this box to hide the clutter, or you can easily employ multiple cable boxes to help make your floors organized better.

10. ADJUSTABLE CABLE CLIPS CLAMPS

These types of adjustable cable clip clamps are proved great for routing cables according to your choice.

11. CABLE TIE MOUNTS

Cable Tie Mounts can be also used in connection with conventional cable ties to many route cables. Basically threading the cable usually ties through the loop of the mount, gathering your cables together and can also fasten the cable tie.

12. TOPHOME CORD ORGANIZER HOLDER HEADSET HEADPHONE EARPHONE WRAP WINDER/ CORD MANAGER BLACK CABLE WINDER

This process is very amazing for headphones. To get your headphones tangled up after collecting them away from your pockets is not something new and so this can be the perfect accessory for preventing this type of issue happening.

hide cords on wall

How do Cables manage PC fans?

There are more chances that you will be upgrading at the lowest part of your system within a year or two of making it. You can also open up your computer system from time to time to clean up all the air filters, also help in setting your RAM, or will always show your components generally to your friends. It is more easier to upgrade video cards also if there’s a clear path to it, instead of a spaghetti-bowl of cables observing the pathway.

If you are searching for fans purposes, you will have to approach cable management in some groups. For example, you can usually group your cables for top and rear fans separately, or you can also group your cables for front and internal fans together besides the motherboard tray. This is very clearly said that you have to always keep in mind the total number of Molex connectors and you will be needing to complete the job and maybe you will need to add some other Molex cable to your PSU.

As we all know, fans usually contain some very smaller parts and you can easily connect their wires by many gaps between many components or by many small holes that are usually around the motherboard tray. And it is also having visible fan wires in the system that can easily disappear by using a little black tape, too.

This is known as a little hindsight, but i will still recommend that by checking out many cases that basically come with a preinstalled fan hub ( for 3-pin connectors) like the switch 810, and it will be more convenient.

Hide Wires

Modern technology nowadays has made many aspects of everyday life more convenient and comfortable, but sometimes this technology may come with unseen wires. This guide will also help you in teaching how to hide cables quickly and easily, without drilling into your walls, whereas also keeping your home looking clean and modern. If you are preferring to hide TV wires behind the wall, then this guide will surely go through with every step of the same process.

If you need any help in identifying a tool or material for hiding wires?Then you will have to find products fast with image search on any online app. So when you are snapping a picture of a specific item you like and we will show you similar products.

How to Hide TV Wires

  1. Measure:

Measuring the wall to introduce the length of the cords you will want to cover.

  1. Cut:

Cutting the base and cord which is covered to match the length you have just measured.

  1. Mark anchor points:

Using a pencil to mark the anchor points on the wall. Using a level to ensure that they are very straight.

  1. Mount base:

Using anchors and screwing to mount the base of the cord covering to the drywall. The screws may either be included with the cord cover, or you will need to check the manufacturer’s instructions to make sure you will use the right sizes.

  1. Lay the cables:

Laying the cables over the base and snapping the cover on to organizing.

  1. Paint:

Painting the cover to blending it in with the wall.

How to Hide Electrical Cords

  1. Use cable ties:

Using cable ties to bundle cords and snipping off the ends when needed.

  1. Conceal with flex tubing:

When you are measuring the length of the cords you want to organizing, then measuring and cutting flex tubing to match the length.

  1. Wrap around the wires:

Pulling the tube apart and wrapping around the wires that were tied together.

How to Create a Charging Station

  1. Select a drawer:

Picking a drawer or lower cabinet at your desk that is very near to an outlet.

  1. Drill a hole:

Using a drill with a hole saw bit to drill in a hole in the back of the drawer or cabinet.

  1. Insert power strip:

Feeding the plug from the power strip throughout the hole you just drilling in the back of the drawer or cabinet.

  1. Attach power strip:

Applying double-sided adhesive to the back of the power strip and sticking it to the back of the drawer or cabinet. Now, you can also plug very easily in your electronics!

How do I connect cable to my computer?

If you want to connect the cable to your computer, you will need to plug one end of an Ethernet cable into the other port of Ethernet or LAN which is back of your modem, after that you will have to plug the other end into the Ethernet port on the back of your computer. Your modem should also come with an Ethernet cable, but any old Ethernet cable will also do so.

Cable Internet usually brings high speed Internet, or broadband, into the home area at speeds more than 10 times faster than dialling up the phone. When your cable Internet service begins, a technician has to come to wire your home with a cable line and use it to install a cable modem. It is basically the employer’s responsibility to connect and set up the computer system in the home for Internet access. If you will also have more than one computer in your home, you will have to use a router to providing an Internet connection to several PC’s.

Step 1

First of all, connect one end of the Ethernet cable to the port on the cable modem which is named as, “Internet” or “Ethernet.”

Step 2

Then you will have to insert the Ethernet cable to the network port on your computer system. The port is also located on the back of the PC. If you are still using a router, the end of the cable usually connects to the first port from the left side of the wireless router. After that you will have to verify that the green light on the other side of the router should blink.

Step 3

After that, you will have to insert another Ethernet cable into another available port on the router and then connect the second end to a computer’s network port. Generally you have to repeat this step for each PC that will always needs an Internet connection.

Step 4

After doing that, press the power button on the computer to reboot your computer Windows. Then click “Start,” and after that click “Control Panel”.

Step 5

Next you will have to type “Network” in the search box and then click on the “Network and Sharing Center” option.

Step 6

After that click on “Set up a new connection or network” and next, double-click on “Connect to Internet.” Windows will surely take a while in connecting to your PC to the Internet.

Then press “Start” and then click on “Programs” and next click on “Internet Explorer” option to test the Internet connection. Then you will have to type a URL in the address bar and at last will press “Enter.”

Tv Cable Management

Cable ties are a more affordable way to organize the cables connecting from the TV to other parts of an AV system. But avoid buying single use plastic ties instead of getting Velcro or even wire-based twists used to tie, as these are really adjustable. When cables are running together, always trying to keep AV interconnects and electrical cables separated regularly.

That usually prevents electrical interference, which can basically result in a degraded audio or video signal. So you will have to use the ties to fix the cables with the natural boundaries of AV furniture and walls.

When wall-mounting a TV, you will probably don’t searching for a power and HDMI cable tangling down from the bottom. If you really don’t want to drill holes in the walls, you will have to use cable channels that generally attach to the wall and can also be painted to mix up with your decor. Even much better, you will have to buy white HDMI and power cables, which will be also providing a more clean look.

Cable Management Tips

Cables, oh no! They will usually bunch up like some ramen noodles under your desk or beside your desk on the floor. I usually know most of you are having your own special ways of dealing or not dealing with the desired cables. Please interrupt me, and would also check out these following five tips for cable management.

  1. Tie them up: Simple zip ties can usually keep cords together so they can not splay out into spaghetti. Velcro zip basically ties are more handy if you are moving chords a lot and needing to move the ties. A lot of people swear by multiple ties, which are basically reusable and more stronger than velcro.
  2. Labeling: When you are looking at your power strip, you can remember the wall ports with which device, but you will have a lot of black plugs that look the same as labels so you will don’t have to trace it back. Same thing that goes for HDMI cables going into a TV.
  3. Hide those cables: You can have to wrap them in foam insulation or by using a paper towel tube. You can also use old shoe boxes or photo boxes with most of the cutouts to bundle all the cables together unseen. Or you can also use a wire basket even.
  4. Binder clips: This can be a good choice for those cables you want to unplug and leave those on your desk. Rather than hoping they don’t fall besides your desk, also attach a binder clip to the edges of your desk and also have to run the cable through one of the wire parts which you will use to squeeze the clip.
  5. Wireless: Like Wi-Fi and Bluetooth will be getting better, you can be able to replace some of those wires together. This one would not work for everything, but it is also becoming a viable replacement for cabled materials all the time, so it will be worth observing.

1.Hide Cords On Wall

TV wires, cords and cables for most other must-have equipment can also be more irritating. But before you will hit a point of swear off technology together, after checking out the cord management solutions under the desks. You can also buy or DIY to conceal or hide every wire in sight issues and permanently improve the system of your home.

2. Feed Wires Through a TV Stand

If you are feeling more creative, then you can also hide some mixed cables besides a stand-mounted TV by using an unorganized cord storage in the design of your own TV stand. This one is basically designed by Heidi from Kruse’s Workshop and will also keep cables which are contained in a knot that runs down the middle at the back side of the system. You can also recreate the stand formation from scratching the claimed wood. Following the blogger’s detailing instructions for how we can use a table saw to create a concealed groove in the back leg, then you will have to run the cords for your TV and other mediums of entertainment essentials are going down the groove in the leg to keep them unseen.

3. Hide TV Wires in Plain Sight

If the cords are tangling from your wall-attached TV are basically distracting you from what’s on display, conceal them by using cord covers. Plastic tracking is also like these which are connected directly to the wall on top of wires.

To install and effectively hide the TV wires, measure the duration of the wall between the base of the screen and the floor as well, and that’s how the length of cord cover you are needing, and you can also cut it to fit. In most of the cases of the Cable Concealer Kit, you’ll have to cut the base and top of the cord cover by using a hacksaw. Then, place the raceway base to the wall by using screws as given by the manufacturer’s instructions, lay down the TV cords inside the channel, and also snap the cover in place on the top. Cord can also cover typically sold in many neutral colors like white or metallic gray that can always stand out if your wall is a different color. But when painted by using the same color as your wall, they perfectly blend into the wall space.

4. Run TV Wires Behind the Wall

The best solution of keeping the cords of a wall placed TV unseen usually involves hiding them behind the wall itself by using many organized cable plates (e.g., Datacomm Cable Organizer Kit, easily available on Amazon). Remove the TV from the wall. And then you will have to use a stud finder to find two stud-free sections of the wall. Where the one is behind the screen would sit, and another cable down the wall near an equipment. These are where you will make your cuts using a utility knife very easily, then you will fit two cable plates, and by feeding the TV cords in and out of the wall surface.

5.Tuck Cord Chaos Into Tubing

Usually can’t manage the mixing of cords in your home office for PCs, monitors, phones, printers. And other devices that are used daily like a cable wrap (e.g., Cable Slinky, easily available on Amazon) which is providing an easy way to consolidate all the loose cords that tangled from your desk. Simply collect them together in your hands. And cover the 2ft pieces of flexible wire tubing around the wires to collect them into one larger one and minimize cables. Thanks for giving slinky shape. You can also break out and redirect wires from the group anywhere with the stretch so that they can easily reach exactly where they want to go.

6. Slip Them Into a Drawer

Making some creative modifications to a desk drawer can do away with the eye case of a clunky power strip which is placed on the floor and overflowing by using all the cords. By using a hole, it can be attached to your power drill. By drilling a hole into the back panel of the desk drawer which is usually located near a wall outlet.As you are plugging electronics into the power strip. So after creating a space for each equipment to rest while it is charging in the drawer.

Desk wire management

Desk cable management is also like cleaning your room. It is basically a hassle in the moment but feeling very near therapeutic when you’re completed done. Basically, it’s not that much easy as vacuuming and putting stuff far away. You will need a plan of attacking and at least a few hours to set aside to properly hiding all your wires.

We have already condensed everything which you need to knowing about desk cable management into a simple 5-step process. You will have to follow it to the completion and you will also be feeling a joy you never knew what you needed.

  • Step 1: Start from Scratch
  • Step 2: Position Your Power
  • Step 3: Add Cable Management Features
  • Step 4: Mount Your Monitors (Optional)
  • Step 5: Route Your Cables

Step 1: Start From Scratch

If you want to start with a brand new setup, then it is really perfect. If not doing so, this is your turn to start over by using a clean slate. Then you will have to disconnect your connections from your PC and everything from your cable protector. After that you can easily proceed.

Step 2: Position Your Power

This is a key piece to your desk cable management question is the place of your power strip. But when your position in your cable protector strategically. You can set yourself up for a much easier cable management experience.

Access your situation and then decide which of the three positions will work for you:

A) Underside Of Desk

This is basically the most ideal spot. By placing your cable protector under your desk. All of your power cables can also route away from view behind and one of the best pieces of cover at the disposal.

B) Hidden On The Floor

If your desk setup is already providing a lot of cover. Placing your cable protector would not be necessary. But most of the time, the best place for your cable protector is on the floor somewhere unseen.

Such a good place to hiding your cable protector:

  • between a desk drawer and the wall
  • behind the furniture and objects on the other side

C) In A Box

In some of the cases you will have the most naked desk setup ever. So you can also hide your cable protector in a very neat and clean cable management box.

Step 3: Add Cable Management Features

You must be lucky enough for already having built-in cable management features on your desk.

Step 4: Mount Your Monitors 

Placing your monitor not only helps with cable management. Even it also helps with clearing up space on your desk for having an extra clean look and that’s the actual goal right now? There are two ways to follow the same.

Wall Mounts

Most of the time wall placing of your monitors requires drilling holes which can be a detractor to some but it is the more cleaner option. When combining with routing your wires into the wall. You will end up with “floating” monitors without even a single stand or cable seen.

Step 5: Route Your Cables

Now we all have been waiting for playing with the cables according to our choice.

Reconnect Everything

Now you will have to start reconnecting all your cables to your computer, hiding and guiding your wires by using your cable management features. Whenever you can do so. You will have to do the same with the cables going to your cable protector.

Because of your thinking of hidden cables protector and cable management features. Everything should always have to look pretty good already when it will be reconnected.

Tie Up Loose Ends

Despite your all the best efforts. There will be many cords that just could not tuck away very neatly into your cable management compartment. Some cables will always hang loosely and large bundles of cables are not looking that much pretty. This is where you can easily tighten everything up.

Use always cable clips to manage all the stray cables that could not make it into your cable management compartment. If you don’t have a compartment at all. You will basically have to use a whole bunch of cable clips to keep it all tight to your desk.

 

 

Leave a Comment