Top 7 Best Poe Switch For Ip Cameras

What is Power over Ethernet (PoE switch)?

Power over Ethernet (POE) is a technology that lets network cables carry electrical power. For example, a digital security camera normally requires two connections to be made when it is installed:

A network connection, to be able to communicate with video recording and display equipment

A power connection, to deliver the electrical power the camera needs to operate. However, if the camera is POE-enabled, only the network connection needs to be made, as it will receive its electrical power from this cable as well. Now we will choose the Best Poe Switch For Ip Cameras

Do I need a gigabit switch for IP cameras?

Most of all IP cameras will nevermore come near to 100 Mbps so a gigabit port is not required for the port that the camera is plugged in. The maximum settings can cameras hold is up to 4 Mbps. Still, IMO, the switch must support at least 2 GB uplink ports.

Do I need a managed switches for IP cameras?

It is crucial to remark that unmanaged switches are considerably less expensive than managed ones. Most linked router/network switch devices incorporate an unmanaged switch. Unmanaged switches will work nicely for maximum IP camera/encoder connections where the total IP monitoring device count is less than 20.

Are all IP cameras PoE compatible?

There are two kinds of PoE, standard PoE, & PoE+. The standard type of PoE saw on most IP cameras, IEEE 802.3af can transmit up to 15 watts of electricity. This amount of power is not sufficient for PTZ cameras or cameras with fans and heaters for outside use but is sufficient to power basic IP monitoring cameras.

Best Poe Switch For Ip Cameras

How do I use a PoE switch for IP cameras?

  • Join an Ethernet cable from the LAN port toward the PoE switch to your router.
  • Join IP cameras to ports 1~8 on the PoE switch via the Ethernet extension cables.
  • You need to add the cameras to the NVR to see the cameras and enable recording.

Why PoE switch?

Specifying Power over Ethernet brings many advantages to an installation:

Time and cost savings – by reducing the time and expense of having electrical power cabling installed. Network cables do not require a qualified electrician to fit them and can be located anywhere.

Flexibility – without being tethered to an electrical outlet, devices such as IP cameras and wireless access points can be located wherever they are needed most, and repositioned easily if required.


Safety – POE delivery is intelligent, and designed to protect network equipment from overload, underpowering, or incorrect installation.

Reliability – POE power comes from a central and universally compatible source, rather than a collection of distributed wall adapters. It can be backed up by an uninterruptible power supply or controlled to easily disable or reset devices.

Scalability – having power available on the network means that the installation and distribution of network connections are simple and effective.

Devices that use Power over Ethernet

POE has many applications, but the three key areas are:

VoIP phones – the original POE application. Using POE means phones have a single connection to a wall socket and can be remotely powered down, just like with the older analog systems.

IP cameras – POE is now ubiquitous on networked surveillance cameras, where it enables fast deployment and easy repositioning.

Wireless – Wifi and Bluetooth APs and RFID readers are commonly PoE-compatible, to allow remote location away from AC outlets, and relocation following site surveys.

How to upgrade to PoE?

Adding POE to your network is straightforward, and there are two routes you can choose: A POE switch is a network switch that has Power over Ethernet injection built-in. Simply connect other network devices to the switch as normal, and the switch will detect whether they are POE-compatible and enable power automatically.

POE switches are available to suit all applications, from low-cost unmanaged edge switches with a few ports, up to complex multi-port rack-mounted units with sophisticated management.

Midspan is used to add POE capability to regular non-POE network links. Midspans can be used to upgrade existing LAN installations to POE, and provide a versatile solution where fewer POE ports are required. Upgrading each network connection to POE is as simple as patching it through the midspan, and as with POE switches, power injection is controlled and automatic.

Midspans are available as multi-port rack-mounted units or low-cost single-port injectors.

It is also possible to upgrade powered devices, such as IP cameras, to POE by using a POE splitter. The POE splitter is patched into the camera’s network connection and taps off the POE power, which it converts into a lower voltage suitable for the camera.

home poe switch

Best switch for IP cameras

While installing IP cams around the residential area, You don’t need to think about the power outlet for each IP camera. That is where the PoW switches are introduced, It enables the PoE-enabled IP cameras with power outlet and network connection required for a single Ethernet cable.

In this buyer’s guide, you will understand some stuff before buying the PoE switch of IP cameras. There are several advantages in the PoE switch and that will be listed below at the end.

If you don’t have enough time to research PoE and IP camera ports. Then You should look for yourself in this guide. And one of the suggestions to you is Ubiquiti UniFi 24 Port PoE switch. It is the best when performance is concerned. It has specified software namely UniFi Controller to control and hold all the IP cameras connected via this PoE switch. It is remarkably high in performance and it is budget-friendly.

Comparison Report


Name No.of.port Total Power Consumption Switch Type Price
Netgear GS116PP 16 183W Unmanaged $179.99
TP-Link SG1005P 4 26W Unmanaged $49.99
Ubiquiti UniFi 24 Port 24 250W Managed $380
Netgear GS324TP 24 190W Smart $282.98
IPCamPower 24 250W Unmanaged $169.99
YuanLey 16 250W Unmanaged $139.99
Ubiquiti UniFi 48 Port 48 500W Managed $818.69


List of Best Poe Switch For Ip Cameras

Pick #1 Netgear GS116PP poe switch

It is easy and simple to install and set up the switch. Plugin the power cord and connect the IP cameras to the PoE switch. It doesn’t need any additional software to install or set up. And, it doesn’t need any configuration. If you connect your IP cameras to this PoE switch it is easy to manage and control. It is the best PoE switch on this list.

The Netgear GS116PP holds 16 ports. All ports in the PoW switch support GB and also it supports PoE+. Since it supports PoE+, the output will be more powerful and accurate. It is a 16 port PoE switch for IP cameras.

As far as power is concerned, the total power consumption is about 183W. Assume, IP cameras need 10W of power to run, so that you can use all the ports of the PoE switch to utilize the switch reliably and efficiently.

As the Design is concerned, The Netgear GS6116PP has a vivid yellow strip given below the ports and on the yellow stripe, the port number is printed on the top. Many users are fond of this yellow strip and they even buy this PoE for this bright yellow stripe design.

It is handy, as far as mounting is considered. It can simply be placed on a flat exterior, or hand on a wall, or rack-mounted. All of the required mounting tools are included in the box.

As is the case with many network switches, the GS6116PP highlights a fanless configuration which implies zero added noises wherever it is placed.

There is also a con on this PoE switch, Users claimed that; connecting more than 10 IP cameras results in a loss of connections. For this particular reason, it will be a wiser decision to look for another PoE switch, which will suit your preference.

Still, if you seek good high-performance ports, the Netgear GS116PP is the ideal pick.

Check Last Price

Pick #2 TP-Link TL-SG1005P poe switch

It is a cheap PoE switch available in the market. If you are looking for a home PoE switch, then the TP-Link TL-SG1005P is an ideal choice. It holds only a few ports on the switch. It is the perfect pick for residential use, with few IP cameras.

You can see, it holds 5 ports but in those 5 ports only 4 ports are PoE ports. Those 4 ports support GBs but not PoE+. It is not a reliable revival for other switches but still, it is the best PoE switch pick for residential purposes.

As far as power is concerned, the total power consumption is about 56W. Assume, IP cameras need 10W of power to run, so that you can use all the ports of the PoE switch to utilize the switch reliably and efficiently.

If you have more than 4 IP cameras to connect, then you should look for others. It is easy and simple to install and set up the switch. Plugin the power cord and connect the IP cameras to the PoE switch. It doesn’t need any additional software to install or set up. And, it doesn’t need any configuration. If you connect your IP cameras to this PoE switch it is easy to manage and control. It is the best PoE switch on this list. Moreover, it is a Plug-and-play model. Because it is an unmanaged switch. Also, it had a Power Overload protection option.

If the maximum power consumption of 56W is exceeded, it will automatically evade the lower priority port OFF to assure the high priority port power to maintain in reliable condition. it will never let your IP cameras get damaged with an overload effect.

Few users claimed that connecting more than 2 devices results in low transfer speed. If you link a new device to the PoE switch it gets disconnected in a minute. It is not worthy of the IP cameras.

As for the IP cameras, it needs a constant and reliable connection to survive. So for linking IP cameras it is not recommended, because it will not hold a reliable connection.

Lengthy ethernet cable also does not look to play too nicely with this switch, despite being well within the prescribed limit for a single length of Cat6 cable. It could be an issue when you have IP cameras connected to the outside of your home.

If you are on a budget and need a simple switch to link just a few IP cameras, the TL-SG1005SP is the proper choice.

Check Last Price

Pick #3 Ubiquiti UniFi 24 Port poe switch

Ubiquiti is famous for delivering first-class networking devices and switches which will never let you down or it will never compromise on its standards. Since it holds a good name in the market, it will be pricey too. But, it will never disappoint you in standards. It also holds a standard in data transfer as well as the power to the IP cameras. It is the best 24 port PoE switch available in the market.

The Ubiquiti UniFi PoE switch holds 24 GB ports. It may look like a clumsy bundle, but it is the ideal choice for commercial purposes. If you have several IP cameras and need to operate without any hassle, it is the ideal choice.

One of the unique features available in this PoE switch is, you can configure each port either by PoE or PoE+; depending on your requirements and the number of IP cameras, this UniFi switch can be configured.

The maximum power consumption of 17W and it can be enhanced up to 34.2W while using PoE+. It is sufficient for imperious cameras, which hold tilt, pan, and Zoom abilities.

Since the UniFi is managed PoE switch, you will get many features that are incomparable to the managed switch. These features and devices are manageable via UniFi controller software.

With the UniFi controller, Configuring the PoE settings for each port is achievable. Also, you can configure and set up the port mirroring, spanning tree, and VLANs for these ports with the UniFi controller. It is simple to handle and it is powerful too.

As far as design is concerned, it has a shiny silver finish, holding all 24 ports on the right side of the PoE switch and LOGo on the top of it. If you are a network freak and need to control all the IP cameras and network devices in one go, then this Ubiquiti UniFi 24 port PoE switch is an optimal pick. Appearance-wise it is a bit ugly, compared to other switches but performance is concerned, it stands out of the crowd proudly with great performance.

If you want to control and configure entire network devices and IP cameras then this UniFi switch is an ideal option. It will never disappoint you with the performance. It holds the best abilities to stand out from the crowd.

Check Last Price

Pick #4 Netgear GS324TP poe switch

The GS324TP Netgear switch is a 26-Port switch, but only 24 ports are Gigabit Ethernet ports. The remaining 2 ports are 1g-SFP ports, which will permit the connection of an optical fiber cord or the Ethernet cord. It implies the switch will become either star network or ring network topology. Whereas a single network will be distributed across different buildings or floors through Optical fiber cabling.

It is not an ideal pick for home or residential purposes. But it is a perfect option for commercial purposes. If you purchase this switch for residential purposes, then it is the waste of ports on the switch. You can connect and link many networking devices, still, it’s plenty for home use.

The total power budget for the PoE switch is 190W, even though it is a 24 port PoE switch, it consumes less power compared to other 24-port switches.

It is a smart switch, it is placed in the list between the managed and unmanaged switch, because it acts like both. You will get all the features the managed switch gives, without hitting the high price. It is easy to configure the switch. Even a layman can configure without trouble.

You can mount the switch wherever you desire, it holds all the mounting options, and kits are included with the box. Either it is a flat surface or a rack or on the desk, everything is possible with this switch. It is the best 24 port PoE switch available in the market.

Few users admitted that the switch is noisy and distracting if you connect more PoE devices to the switch. You should consider this particular aspect if you are thinking of leaving your switch in the garage or the basement. It will be scary at night time.

The GS324TP is a switch to think if you have many IP cameras to link and require the highlights that attain with a smart switch, still, the total power budget is to remember as it might suffice for few users.

Check Last Price

 Pick #5 IPCamPower poe switch

24 PoE ports W/ 2 additional non-powered GB rated ports. The unmanaged POE switch is a 26 Port switch in total. (24) 10/100 PoE Rated Ports Intended for your IP Cameras or other network devices that need PoE. Additional Non-Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffic from your IP cameras to run to your Server or Router. If you are looking for a home PoE switch, then the IPCamPower is an ideal choice.

Each port is capable of enduring PoE+ up to 30W per port for power starving devices. If you have IP cameras or network devices that need abnormal high watts, such as a PTZ for instance, the IPCamPower switch can enhance up to 30 W (POE+ IEEE802.3af/at)  for each port and devices. Of course, it also works just fine on any device that needs lower Watts PoE Power, as well as the switch, which will only drive the amount of power that the device wants. It is a cheap PoE switch available in the market.

Total PoE wattage budget of 250 Watts. It is normally more than enough wattage to drive at least 24 IP cameras with a combination of both POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the linked maximum wattage from all your devices does not exceed a total of 250 watts, the Poe switch will work perfectly. It will be more than enough wattage to fit the majority of situations.

It holds a fanless quiet design and small footprint. It is just a 13x8x1.75-inch PoE switch which is too small compared to other 24 port switches. Fanless Quiet Design. The POE switch is powerful enough to be used in commercial applications yet created with features that make it viable for residential and small business applications as well.

It is rack-mountable with additional rack ear mounts. It includes all the hardware required to mount to the server rack. Nevertheless, since the unit is so small and quiet, you can easily just use it in a desk mount situation as well.

Check Last Price

Pick #6 YuanLey poe switch

Another switch from a nearly unheard-of manufacturer, This particular switch provides a great balance between the number of ports and the total power consumption.

This Yuanley 16port PoE switch is unmanaged and it holds 2 uplink ports and an SFP uplink gate.

All of the PoE ports can render up to 30W of power, but it is noteworthy that all ports only work at 10/100 Mbps, not 1000 Mbps like we are used to observing on the other Gigabit switches.

It could be a deal-breaker if you have IP cameras, or other network devices, with high data demands. The ports operating at a slower speed could quickly become a bottleneck.

The total power budget is 250W. It is the same as we have seen in other switches, but they all have more ports that require sharing the power available. It is a 16 port PoE switch for IP cameras.

With this YuanLey switch, you can use all PoE+ devices and load all 16 ports related to others where you may need a combination of PoE and PoE+ to not overdo the power budget.

Identical to the TP-Link TL-SG1005P, the YuanLEy switch holds overload protection. If the remaining power is inadequate, the power supply of the high-priority port is preferentially available to limit the device from being overloaded.

If you need to rack mount the switch you get tools and extensions. It is helpful to see as you would normally have to buy these separately, or simply end up leaving it desk-mounted.

As was the situation with the IPCamPower switch, there is not anything to whine about with the switch over that the fan can be loud, especially under heavy load. You may notice it gets disturbing if you place it near your workstation area, so attempt and place it somewhere where the noise won’t be so much of a problem.

The evidence that the PoE ports are not Gigabit might also be a problem for some users. Other than that, the YuanLey switch is a part of a hidden gem. It accommodates a good number of ports, additional connectivity choices, and a large power budget all whilst being very properly priced and affordable.

Check Last Price

Pick #7 Ubiquiti UniFi 48 Port  poe switches

The Unifi 48 Port Network Switch is a fully managed PoE+ Gigabit switch, enabling intelligent switching for ever-expanding networks, whilst delivering consistent, reliable performance over time. This US-48-500W switch supports up to 70 Gbps, offering no packet loss when forwarding traffic on all ports.

The US-48-500W will automatically detect 802.3af/at compatible devices by default, powering them via PoE (power over ethernet). The Unifi US-48-500W offers PoE+ flexibility with 48 Gigabit Ethernet ports, this network switch is capable of auto-sensing 24V passive PoE or IEEE 802.3af/at for simplified configurations. Other options are accessible, including 24V passive PoE for compatible devices, by using the free Unifi Controller software. It is the best 48 port switch available in the market.

For those users seeking something not as highly-spec and at a lower price point, UniFi also offers the Unifi 24 Port 250W Network Switch (US-24-250W). It is a simplified version compared to the US-48-500W, as it includes 2 x SFP ports (instead of SFP+), and allows uplinks of up to 1 Gbps (instead of 10 Gbps) and non-blocking throughput of up to 26 Gbps (instead of 70 Gbps). Alternatively, there is a less expensive, non-powered version of the 48 port Unifi Network Switch (US-48) offering the same performance without PoE.

The best 48 port switch gives you many fiber connectivity options, enabling you to expand your networks without compromise. The 48 Port Unify Network Switch integrates 2 SFP+ ports, offering uplink speeds of up to 10 Gbps; allowing the user the option of deploying a long-distance uplink to another network or connecting to a high-performance storage server.

Control options allow multi-site management with a single instance of the Unifi Controller software running in the cloud, giving you the option to manage multiple Unifi sites from one centralized interface. Each site is monitored separately and has its configuration, admin accounts, statistics, and maps.

All Unifi Network Switches allow a seamless integration into the Unifi Software-Defined Networking (SDN) platform; this enables users to create highly scalable, end-to-end network infrastructures of multiple devices across multiple locations, all being controlled by a single interface.

Check Last Price

Advantage of using PoE switch for IP cameras

Utilizing a proper PoE system has numerous benefits for businesses and organizations everywhere. From simplifying cabling to making your system easier to manage, here are just of advantages of using PoE:

Easy Installation

Since PoE systems require only one cable for power supply and internet and are installed by anyone, installation is much lower than traditional options. With a more traditional system, you are required to hire a certified electrician to install separate power cables which can burden an organization wanting to move quickly.

By reducing the amount of cabling and hardware, maintenance is much less than a traditional system and can be managed through a Simple Network Management Protocol. With cloud systems, the only thing you need to maintain is the cameras, cabling, and PoE switches.

By not being tied to an electrical outlet, cameras can be installed in more places where an outlet is not easily accessible. If cameras need to be taken down or moved to a new location, all you have to do is move the ethernet cable.

It is reliability

When using PoE, you have one cohesive and central power source instead of different wall adapters. You also can create an uninterruptible power source for your PoE switch to ensure the cameras continue to run even when the power goes out.

It is safety

If you are using quality components, PoE is designed to deliver power safely and efficiently. PoE devices ensure proper power throughout the life of the product to prevent overloading or under-powering. More advanced PoE products also have protection systems to prevent short-circuiting, or excessive current, making it much safer than a traditional system powered by an outlet.

If you need to add more security cameras, you can do so easily by adding more network connections. Some options even allow you to set up cameras across many locations, and if you are using a PoE setup throughout your entire company, you will no longer have to worry about difficult installations when you want to install more cameras.

best 24 port poe switch

PoE Switch Buying guide

POE network switch is a special kind of the many network switch types that has power over Ethernet injection built-in. POE is the abbreviated form of Power over Ethernet where Ethernet is a system that connects multiple computer systems to form a local area network.

Before purchasing a POE switch, it is essential to consider certain prospects and technical specifications. Here is the guide for the same.

IP Camera power consumption

How much power an IP camera consumes is quite important, especially since most PoE switches do not support max power to each camera. Unfortunately, PoE Power Problems are commonplace. However, this can be overcome by measuring power usage.

Actual PoE power consumption was generally significantly lower than specified by the manufacturer. In high-complexity scenarios, huge amounts of motion along with shaking the tripod the cameras were attached to did not increase power consumption.

The power consumption can vary from one IP camera to the next. Some of the more capable cameras can consume as much as 20W of power, while others consume much less at around 4W.

The PoE switch you are looking at purchasing needs to be able to provide a suitable amount of power to cater for different IP cameras; you never know when you may decide to upgrade your cameras and then find your switch is not up to the task, and have to replace that too.

Cameras boot at a higher wattage, but after ~30 seconds, will settle at nominal levels. In most cases this difference is small, 1-2W, though in some cases, such as the Hikvision example below, was as much as 4W.

When it comes to Power over Ethernet, there are two main standards: PoE (IEEE802.3af) and PoE+ (IEEE802.3at). Standard PoE can provide up to 15.4W of DC power at each port, whereas PoE+ is capable of providing almost double that at 30W of power per port.

Power draw of built-in IR illuminators varied from camera to camera, as all used different quantities, sizes, and styles of LED. However, an average increase of ~2W was common, with a maximum of 5W seen in the Avigilon H3 bullet (with the longest range). It is worth bearing in mind that some power is lost as it dissipates within the network cable itself, so you can expect to receive around 12.95W on PoE and 25.5W on PoE+.

PoE power consumption figures are not always readily available or straightforward. Some manufacturers specify consumption at 12VDC.

Total Power Budget

Network administrators nowadays are more inclined to incorporate PoE switches into their network, anticipating reducing the hassle of connecting equipment to a power supply. Moreover, the PoE switch also significantly decreases the number of cables needed and is ideal for network upgrades.

To understand the PoE network switch power consumption, let’s first get some insight into the two most relevant PoE standards denoting power output: 802.3af and 802.3at. The older 802.3af provides 15.4 watts of power, serving as the standard for PoE switch, whereas the newer 802.3at standard – known as PoE+, enables up to 30 watts of power.

But as we plug the cable into the PoE port, power losses occur, and the level of loss heavily depends on the cable length – the longer the cable is, the more the loss can be. So the minimum output power guaranteed for the PoE switch is 12.95 watts, and 25.5 watts for the PoE+ switch.

Power supply voltage

On the off chance that an IP camera is not provided with the right voltage, quite possibly it essentially will not work, or perhaps become over-burden and break totally.

Most IP cameras will run utilizing either 12V or 24V of force. You need to guarantee that a 12V camera is controlled by a 12V force source, and a 24V camera is fueled by a 24V source.

Combine and match voltages and you may before long discover your camera singed.

Rather than taking a gander at either, I would suggest rather watching out for the element of having the option to naturally change voltage relying upon the gadget that is associated, and its force necessities.

Search for a PoE switch that is IEEE802.3af consistent as this ought to have the option to adapt to the shifting force prerequisites of various IP cameras. It is consistently worth checking with the maker on the off chance that you do not know, however.

Number of ports

Switches offer anywhere from 4-port to 54-port models. This decision boils down to the number of users/devices your network supports. Remember, we are in the ramp-up phase of the Internet of Things (IoT).

The larger the network, the greater the number of ports you will require. Are there enough interfaces to support the company/network when it grows? You will be required to choose a switch that has more interfaces than you need. It is better to have it and not need it rather than need it and not have it. The suggestion includes L2 features for managed switches.

Employee population growth is not the only factor driving network size. Display screens, digital signage, wireless access points, heating, and cooling systems, SMART lighting, security systems, and even appliances like refrigerators are all in the process of coming online; everything matters when port numbers are concerned.


No.Of.Port     PoE/PoE+    Total Power availability


4                        PoE                              052W

16                      PoE+                           408W

24                      PoE                             311W

24                      PoE+                           612W

Unmanaged VS Managed VS Smart

poe switches reviews


Used for home networks (home PoE switch) /small business offices or shops. Its benefits are plug-and-play, affordable and simple. These switches can’t be modified or managed, so no need to enable or disable interfaces. They are great for companies without IT admins and junior technologists. They do not offer any security features, but if you are using it in your home or a small network of fewer than 5-10 computers, they provide ample support.

If a business handles sensitive information such as an accounting firm or a bank, we recommend going with something more secure.


Used for business applications such as VoIP and smaller networks. Its Benefits are offers no-frills management, security features, and costs less than managed

Smart switches are comparable to managed switches, but with limited capabilities that can be accessed from the Internet. You don’t need highly-trained staff to set up or run. Their interface is more simplified than what managed switches offer.

They do offer options like Quality of Service (QoS) and VLANs. They are great for VoIP phones, small VLANs, and workgroups for places like labs. Smart switches let you configure ports and set up virtual networks, but don’t have the sophistication to allow monitoring, troubleshooting, or remote-accessing to manage network issues.

The Managed POE Switch

Used for enterprise networks and data centers. Its benefits are to offer full management capabilities and security features

Managed switches provide high levels of network security, control, and management. They’re ideal for operations that require off-site round-the-clock monitoring and remote-access control capabilities.

Managed switches cost the most, but they are well worth the investment and pay for themselves over time. The scalability of these switches allows networks room to grow.

Advanced functions include:

  • prioritizing user traffic
  • partitioning a network
  • connecting different types of networks
  • monitoring traffic as it passes through the system.

Managed switches can optimize a network’s speed and resource utilization. Admins manage resources through a text-based command-line interface, so some advanced knowledge is required to set up and run.

Gigabit VS 10/100 Mbps

When working on the selection of the best POE switches, it is by and far very essential to determine the extent of switch engagement and requirement to define the speed required for the job to be done. The POE switch that you are looking to purchase, irrespective of the type, must be checked for the speed that it has to offer.

Most computers and network equipment are built with Gigabit interfaces, and it is becoming the standard. The issue can also fall under scalability as well if the company or network does not grow, but the demand for faster links is required. I will suggest a Gigabit over 10/100 Mbps switch.


Before buying the best PoE switch for IP cameras and network devices, remember to check PoE switches reviews for a better understanding.

Pick a switch that is suitable for your preferences at an affordable price. if you are Richie and rich you have many switches which are costly and reliable. If you are budget-friendly, prefer the switch which can hold, more ports, less power consumption, and Gigabit speed.


8 port PoE switch for IP cameras

The best 8 Port PoE switch for IP cameras are bulleted below for your reference,

  • TP-Link TL-SF1008D 8-Port 10/100Mbps Unmanaged Network Switch.
  • Netgear GS110TPv3 8-Port Gigabit PoE+ Smart ProSAFE Switch.
  • Zyxel ES1100-8P 8-Port Unmanaged PoE Switch.
  • TRENDnet 8-Port 10/100Mbps PoE Switch (4 PoE, 4 Non-PoE)
  • Zyxel GS1920-8HPv2 8-Port Gigabit Smart Managed Switch.


Leave a Comment